Daily maintenance of elevator

一、平時養護:

1、 Normal maintenance:

平時養護應由設備操作司機或運用單位專職人員擔任,設備維護養護單位對平時養護內容負有監督和查看的責任.平時養護主要內容歸納為"十字操作法":清潔、緊固、光滑、調整、防腐.天天班前、班末10-30分鐘,巡視設備各部分、各部位是不是正常,按規則加油光滑,留意機械運轉聲響是不是正常,做好清潔作業和交接班作業,以到達設備外觀整潔,運轉正常之目的,平時養護記載和交接班記載要制成固定表格,并作為檔案管理.

The routine maintenance shall be undertaken by the equipment operator or the full-time personnel of the application unit. The equipment maintenance unit shall be responsible for supervising and checking the routine maintenance contents. The main contents of routine maintenance are summarized as "cross operation method": cleaning, fastening, smoothing, adjustment and anti-corrosion Before and at the end of each shift for 10-30 minutes, patrol all parts and positions of the equipment to see if they are normal, oil them smoothly according to the rules, pay attention to whether the sound of mechanical operation is normal, and do a good job of cleaning and shift handover operations to achieve the purpose of neat appearance and normal operation of the equipment. Regular maintenance records and shift handover records should be made into fixed forms and managed as archives

二、每周養護:

2、 Weekly curing:

1.按操作闡明,保證升降貨梯天天進行查看、光滑.

1. According to the operation instructions, ensure that the elevator is checked and smooth every day

2.保證小齒輪和壓輪在驅動底板上可靠緊固,一起查看驅動底板螺栓固定狀況.

2. Ensure that the pinion and pressing wheel are reliably fastened on the drive baseplate, and check the fixing condition of the drive baseplate bolts together

升降貨梯平時需要做的維護養護

Maintenance required for the elevator at ordinary times

3.查看制動器的制動力矩,參閱闡明書制動器制動力矩查看請求.

3. Check the brake torque. Refer to the instruction for brake torque check request

4.查看減速器的油位,必要時彌補新油.

4. Check the oil level of the reducer and make up new oil if necessary

5.查看吊籠門和圍欄門的聯鎖設備,上下行程等各維護開關.

5. Check the interlocking equipment of cage door and fence door, up and down travel and other safety maintenance switches

6.查看吊籠一切門的聯鎖設備.

6. Check the safety interlock equipment of the first door of the cage

7.查看導軌架上下限位塊方位是不是正確.

7. Check whether the position of upper and lower limit stop blocks of guide rail frame is correct

8.查看電纜導向架的護纜狀況.

8. Check the protective cable condition of cable guide frame

9.查看電纜支承壁和電纜導架間的相對方位.

9. Check the relative orientation between the cable support wall and the cable guide

10.查看一切規范節和斜支持的連接點.一起查看齒條的緊固螺栓.

10. Check all specification sections and connection points of diagonal support. Check the fastening bolts of rack together

11.堅持電動機冷卻翼板及組織清潔.

11. Keep the motor cooling wing plate clean

12.保證電力電纜與電氣線路無破損.

12. Ensure that power cables and electrical lines are free from damage

13.關于帶對重的施工升降機,查看對重導向輪的調整和固定狀況.查看鋼絲繩的均衡設備,天輪和對重鋼絲繩托架.

13. For the construction lift with counterweight, check the adjustment and fixation of counterweight guide wheel, and check the equalizing equipment of wire rope, crown wheel and counterweight wire rope bracket

14.查看升降貨梯附壁支架、支桿、過橋梁之間螺栓、扣環緊固狀況,松動變位的應校對緊固.

14. Check the fastening condition of the wall bracket, support rod, bolts and retaining rings between the bridge and the elevator. If they are loose or displaced, they should be checked and fastened

三、每月養護：

3、 Monthly curing:

1.查看每周查看項目.

1. Check the weekly check items

2.查看小齒輪和齒條的磨損狀況,具體請求拜見闡明書.

2. Check the wear condition of pinion and rack, and refer to the clarification for specific request

3.用塞尺查看蝸輪減速器的蝸輪磨損狀況,具體請求拜見闡明書.

3. Use a feeler gauge to check the wear condition of the worm gear of the worm gear reducer. Please refer to the clarification for specific requests

4.查看升降貨梯導向輪磨損與空隙狀況.

4. Check the wear and clearance of the guide wheel of the elevator

四、每季度養護:

4、 Quarterly maintenance:

1.查看每月所查看項目.

1. View the items viewed every month

2.查看滾珠軸承的空隙,吊輪導向輪的磨損.如滾輪被磨損,有必要調整或替換.如升降貨梯軸承被磨損則替換導向輪或軸承.

2. Check the clearance of the ball bearing and the wear of the guide wheel of the lifting wheel. If the roller is worn, it is necessary to adjust or replace it. If the elevator bearing is worn, replace the guide wheel or bearing

3.掉落實驗查看限速器制動間隔是不是符合規則請求.

3. Drop test to see if the brake interval of the safety speed limiter meets the rule requirements

五、設備轉場養護:

5、 Equipment transfer maintenance:

1.查看電動機和蝸輪減速器之間的聯軸器.并拆檢減速箱,清潔各部件和密封件,替換過度磨損和變形零件及光滑油.

1. Check the coupling between the motor and the worm gear reducer, disassemble and inspect the reducer, clean all components and seals, and replace excessively worn and deformed parts and lubricating oil

2.對吊籠及導軌架等結構件銹蝕進行整理除銹補漆,對銹蝕比較嚴重的受力桿件進行補強處理.

2. Rust removal and paint repair shall be carried out for structural parts such as lifting cage and guide rail frame, and reinforcement treatment shall be carried out for load-bearing bars seriously rusted

3.調整修正各門及機械聯鎖設備.

3. Adjust and correct all safety doors and mechanical interlocking equipment

4.查看光滑鋼絲繩和各扣卡件,有磨損過度有必要替換.

4. Check the smooth steel wire rope and each fastener. If there is excessive wear, it is necessary to replace them

5.清潔查看天輪架總成,修正或替換新件.

5. Clean and check the crown wheel frame assembly, and correct or replace it with a new one

6.查看修整電氣控制線路及操作臺板開關器件.如線路有老化現象須替換.

6. Check and repair the electrical control circuit and the switch components of the operating panel. Replace the circuit if it is aging

7.查看升降貨梯清潔驅動齒輪及各導向輪,如有過度磨損有必要替換.

7. Check the elevator to clean the drive gear and guide wheels, and replace them if they are excessively worn

8.查看限速器運用期限是不是過期,如超出運用期限,有必要送有檢查資歷的單位進行檢查標定.

8. Check whether the service life of the speed governor has expired. If it exceeds the service life, it is necessary to send it to a qualified unit for inspection and calibration

以上就是為大家介紹的有關升降機廠家的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hblsnyfwzx.cn

The above is a detailed introduction to the elevator manufacturers. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.hblsnyfwzx.cn